Jul 18, 2011

The 4th KONDO LAND Multi-Legged Robot Obstacle Race (July 17, 2011)

The 4th KONDO LAND Multi-Legged Robot Obstacle Race took place at ROBOSPOT in Akihabara, Tokyo on July 17, 2011. The games were shown on `USTREAM KONDO-ROBOT Channel` from 1:00 pm to 4:00 pm (JST) and videos are keeping in the Channel.

Nine multi-legged  robots, such as 4-legged and 6-legged robot joined the race.   Video of nine robots in order of start were as follows;

Benzene, 6-longlegged robot by Tama-Kagi-Robo-han who were students in high school.


Tictac5, 6-legged robot using just 3 servos and link system by Amino-san.


BLACK TIGER L44, 4-legged robot by IKETOMU.


Garutan, 4-legged robot by Kumama-san.  Garutan cleared Wobbly Bridge in the trial but could not clear in the real twice races.


Colon, KMR-M6 by Yoshida Familia.


Miwaku-no-Takyaku-kun, 4-legged robot by Takahashi-san.   The robot tried to push the button on the Magic Wall using its long head and stop Magic Wall.


Kabuton, 6-legged robot by Kamiya-san.    The robot also tried to push the button on the Magic Wall and stop Magic Wall.


Gold-Griffon, 6-legged robot by Moriken-san.


Rekusis, 6-legged robot by suzuki-san.  The robot took part in the race on the spur on the moment.


Regulations of the Multi-Legged Robot Obstacle Race  were as follows.

1. Robot body regulation
1) KONDO servos have to be used.
2) There is no limitation of number of axes.
3) Weight of Robot is 3 kg or under.
4) Robot body sizes (arms are folding) are height 30 cm, width 30 cm and depth 30 cm or under.
5) Moving by wheels is prohibited.
6) Control board is free.
7) Robot has to be controlled by wireless or autonomous. Wired control is prohibited.

2. Course regulation
1) Obstacles are set in the KONDO CUP KHR Class Soccer Field.
2) The most narrow width of the course is 400 mm and the lowest height of the course is 400 mm.
3) Material of the floor depends on each obstacle.

3. Competition regulation
1) Just one robot walks the course.
2) Time from the start point to goal is recorded.  The shortest time robot is winner.
3) Each robot can challenge the course twice.
4) Robot has to reach the goal within 3 minutes and the time over robot is retired.
5) Robot gone out of the course gets penalty time 10 seconds and one penalty point.  Penalty time adds to the record of 3 mins.  Robot can restart from the entrance of un-cleared obstacle.  There are no limitations of restart times.  Every restart adds 10 secs penalty time and one penalty point.
6) At the 2nd attraction, Magic Wall, robot push out the moving wall has a penalty time 10 secs and one penalty point.  The magic wall push out is not returned to the obstacle course.
7) Robot can get points by pushing the button in each point getting place, where a point button set.  Getting points are depended on the button set place.

KONDO LAND Attraction Guide


Various kinds of 6 obstacles set in the race course are as follows;

The 1st attraction : `Gattan` Seesaw
A big seesaw, which size are 500 mm in width and 700 mm in length with an inclination of 15 degrees.  A point getting push button for one point is set.  The steep slope is not easy for every robot.  It is important for robot not to slip feet.
Degree of Difficulty:★☆☆☆☆


The 2nd attraction: Magic Wall
A road, which size are 600 mm width and 1,000 mm in length with 2 pushing robots.  Magic Walll is hard for light weight robots.  Robot needs weight and power for push out the Wall.  Push button for stopping pushing robot was set on the each pushing robot.  Player robot can stop the pushing robot by pushing the button switch.
Degree of Difficulty:★★☆☆☆


The 3rd Attraction: Mootan House
A big tunnel, which size are 1,200 mm width and 1,200 mm length with a pitfall (400 x 400 mm).  Two push buttons for one point are set in the House.  Ten point button is set out of the House.  One push gets one point and ten times push get 10 points, however 11 times push makes point zero.  Robots fallen into the trap, cannot return the race course.  Controller cannot see his robot in the Mootan House from controlling space.  Controller can move by the advice of his assistant.  Robot can be attached wireless camera and be controlled through image on PC. 
Degree of Difficulty:★★★☆☆


Robot fallen down under the Mootan House, has to open the gate by pushing button switch set behind the floor in front of Swirling Straits.


The 4th attraction: Wobbly Bridge
A Board Bridge, which size are 400 mm width and 700 mm length, revolves on an axis.  If robots walk the edge of bridge, robots fall down from the bridge.  Robots have to walk slowly in the center of board.  Robot needs to have a low gravity.  Ten points button is also set beyond the bridge and one point button is set in the slope to the Reverse Street.
Degree of Difficulty:★★★★☆



The 5th attraction: Swirling Straits
Robot fallen down from the pitfall of Mootan House, has to pass through the most difficult Swirling Straits.  Space of 900 mm width and 1,000 mm length, filled with sponge balls is too hard to walk.   Robots need to have long legs.
Degree of Difficulty:★★★★★


The 6th attraction: Reverse Street
Belt conveyor street of 500 mm width and 700 mm is moving reverse direction.  Robot has to walk with high speed.  The conveyor is too narrow to walk for big robots.
Degree of Difficulty:★★★★★


The  4th KONDO LAND Multi-Legged Robot Obstacle Race Results

Each robot had twice real time record race.  In the 4th KONDO LAND Obstacle Race, Tictac5 could  clear all 6 attractions twice within 3 minutes. The 1st place was Tictac5 which cleared 2 minutes and 1 second.  The 2nd place were Gartan and Miwaku-no-Takyaku-kun cleared Mootan House with no penalty points.    The MVP was Benzene for their challenging spirits. The result was described here . The best race video of each robot was as follows;

Benzene, 6-longlegged robot by Tama-Kagi-Robo-han who were student in high school. The robot could not go up the slope of the seesaw.


Tictac5, 6-legged robot using just 3 servos and link system by Amino-san. Tictac5 could clear all 6 attractions twice within 3 minutes.


BLACK TIGER L44, 4-legged robot by IKETOMU.


Garutan, 4-legged robot by Kumama-san.  Garutan cleared Wobbly Bridge in the trial but could not clear in the real twice races.


Colon, KMR-M6 by Yoshida Familia.


Miwaku-no-Takyaku-kun, 4-legged robot by Takahashi-san.   The robot tried to push the button on the Magic Wall using its long head and stopped  Magic Wall perfectly.


Kabuton, 6-legged robot by Kamiya-san.    The robot also tried to push the button on the Magic Wall and stopped Magic Wall.


Gold-Griffon, 6-legged robot by Moriken-san. The robot had wireless control trouble and had time race once.


Rekusis, 6-legged robot by suzuki-san.  The robot took part in the race on the spur on the moment.


Details of the competition were described Sanzai-san`s blog (1) , (2) , (3) (in Japanese).   Promotion of the 1st KONDO LAND competition , the 1st KONDO LAND competition, the 2nd one and the 3rd one were described in this blog.

Last Count 13797

Jul 14, 2011

KRS-4031HV, a new KRS-403X Series KONDO Servo, will be put on the market (July 14, 2011)

KONDO KAGAKU CO. LTD. announced a new servo, KRS-4031HV ICS will be put on the market. The shipment is scheduled on July 22nd, 2011 from KONDO’s web shop or other shops.

The new servo, KRS-4031HV ICS succeeds to KRS-4024SHV ICS which was used as the standard survo of MANOI AT01 and PF01. The new servo is suitable for KONDO controller such as RCB-4HV, RCB-3HV and KCB-1. Specifications of the new servo are as follows:

KRS-4031HV ICS
Torque: 13.0 kg-cm (11.1V, in a stationary state)
Speed: 0.16S/60° (11.1V, non-loading)
Maximum moving angle: 270°
Length: 43(H) ×31(W) × 32.5(D)mm
Weight: 55.2 g (excluding horn and cable)
Attached Parts: Cable (400 mm) x1
Price: 6,825 yen (excluding tax), 31,500 yen (6 set, excluding tax)

New KRS-403XHV ICS Series KONDO Servos
Other new KRS-403XHV ICS series KONDO servo, KRS-4033HV ICS and KRS-4034HV ICS, which succeeded to KRS-4013HV ICS and KRS-4014HV ICS respectively, have been put on the market since May, 2010 and the highest speed new servo KRS-4032HV ICS also has been put on the market since Oct, 2010.  As for new KONDO servos were also described in this blog.  These new series servos are suitable for KONDO controller, such as RCB-4HV and RCB-3HV.  Specifications of servos are as follows:

KRS-4033HV ICS
Torque: 30.6 kg-cm (11.1V, in a stationary state)
Speed: 0.12S/60° (11.1V, non-loading)
Maximum moving angle: 270°
Length: 43(H) ×32(W) × 32.5(D)mm, the same size that of KRS-4014HV ICS and KRS-4013 HV ICS
Weight: 61.4 g (excluding horn and cable)
Attached Parts: Cable (400 mm) x1
Price: 16,000 yen (excluding tax), 76,000 yen (6 set, excluding tax)

 KRS-4034HV ICS
Torque: 41.7 kg-cm (11.1V, in a stationary state)
Speed: 0.17S/60° (11.1V, non-loading)
Maximum moving angle: 270°
Length: 43(H) ×32(W) × 32.5(D)mm, the same size that of KRS-4014HV ICS and KRS-4013 HV ICS
Weight: 61.2 g (excluding horn and cable)
Attached Parts: Cable (400 mm) x1
Price: 6,825 yen (excluding tax), 31,500 yen (6 set, excluding tax)

KRS-4032HV ICS
Torque: 19.8 kg-cm (11.1V, in a stationary state)
Speed: 0.08S/60° (11.1V, non-loading)
Maximum moving angle: 270°
Length: 43(H) ×32(W) × 32.5(D)mm, the same size that of KRS-4014HV ICS and KRS-4013 HV ICS
Weight: 60.2 g (excluding horn and cable)
Attached Parts: Cable (400 mm) x1
Price: 16,000 yen (excluding tax), 76,000 yen (6 set, excluding tax)

Last count 13132